Occupancy Controller.. Input is the occupancy state, and the output is the control value for an actuator (typically a lamp)
|
| |
Network Variables | Configuration Properties |
nviOccupancy
nvoLampValue
nviManOverride
nviSecondary
nviSetting
nvoSetting
| nciHoldTime
nciLocation
nciPrimeVal
nciSecondVal
|
| |
Details: |
| Resource Set:
| Standard 00:00:00:00:00:00:00:00-0 |
| Index:
| 19 |
| Obsolete:
| no |
| Key:
| 3071 |
|
Inheriting:
| no |
|
Principal Variable
| nviOccupancy |
Mandatory Network Variables |
| nviOccupancy | Occupancy status input value.: Provides the occupancy status.
|
| Member Number:
| 1 | |
Base type:
| | | Direction:
| input | | Service:
| any | | Minimum:
| OC_NUL | | Maximum:
| OC_UNOCCUPIED |
|
| nvoLampValue | Lamp value output.: State for the lamp actuator (ON or OFF), and the percentage level of intensity.
|
| Member Number:
| 2 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
Optional Network Variables |
| nviSecondary | Secondary occupancy status input value.: Provides the occupancy status of a neighboring area in order to provide low-level lighting around an occupied area for a feeling of security.
|
| Member Number:
| 3 | |
Base type:
| | | Direction:
| input | | Service:
| any | | Minimum:
| OC_NUL | | Maximum:
| OC_UNOCCUPIED |
|
| nviSetting | Setting input (Auto/Off): The mode can be either ON(AUTO) or OFF.
|
| Member Number:
| 4 | |
Base type:
| | | Direction:
| input | | Service:
| any | | Minimum:
| SET_OFF 0,0 -359,98 | | Maximum:
| SET_ON 100,0 360,00 |
|
| nviManOverride | Manual override input.: Enables the local and manual control of the lamp value output.
|
| Member Number:
| 5 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoSetting | Setting output.: Selects the operating mode for another controller (e.g., constant light controller)
|
| Member Number:
| 6 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
Optional Configuration Properties |
| nciLocation | Location label.: Provides descriptive physical location information related to the object.
|
|
| nciHoldTime | Hold time value.: Hold time for occupied state after there is no occupancy detected.
|
|
| nciPrimeVal | Primary default value.: Default lamp value sent when the area is occupied.
|
|
| nciSecondVal | Secondary default value.: Default lamp value sent when the neighboring area is occupied.
|
|
