BELIMO LON® Module for HVAC Actuators
The Belimo LON® Module for New Generation HVAC Damper Actuators is compatible with the LonMark® Damper Actuator Functional Profile # 8110, the LonMark Open Loop Sensor Functional Profile #1 and the LonMark thermostat profile #8060. The Neuron 3150® and FTT-10A transceiver are built-in the LON Module for New Generation HVAC Damper Actuators. One sensor can be connected per LON actuator. It can be either a passive resistance-type sensor (Pt1000, Ni1000 or NTC), an active sensor (e.g. with a DC 0...10 V output) or a switching contact. In this way, the analogue signal of the sensors can be easily digitized with the Belimo actuator and transferred to LonWorks® via LON Module for New Generation HVAC Damper Actuators. The thermostat object LonMark # 8060 makes it easy to implement individual room control solutions. Three LNS® plug-ins are available for the LON Module for New Generation HVAC Damper Actuators. The Actuator plug-in allows the LON actuators to be easily commissioned, the Sensor plug-in allows the corresponding sensors to be easily scaled using a LonWorks network and, via the Controller plug-in, the settings of the controller object can be adjusted through the LonWorks network. The Belimo LON® Module for New Generation HVAC Damper Actuators is built into Belimo actuators for dampers, characterised control valves (CCV), butterfly valves and VAV compact controllers.