Wall Unit Functional Profile..
The Wall Unit profile is used for equipment designed to provide compact, single unit heating and cooling capability, often used in a portable building or trailers where no additional heating or cooling source is available or needed.
|
| |
Network Variables | Configuration Properties |
nviApplicMode
nviEmergOverride
nviSetpoint
nviSpaceTemp
nvoDischargeAirSetpt
nvoDischargeAirTemp
nvoEffectSetpt
nvoSpaceTemp
nvoUnitStatus
nviOccManCmd
nviOccSchedule
nviOccSensor
nviOutdoorAirDamper
nviOutdoorAirTemp
nvoEffectOccup
nvoFanCurrent
nvoFilterAlarm
nvoMixAirTemp
nvoOutdoorAirDamper
nvoOutdoorAirTemp
nvoReturnAirTemp
| cpMaxRcvTimeNV1
cpMaxRcvTimeNV2
cpMaxRcvTimeNV3
cpMaxSendTimeNV5
cpMaxSendTimeNV6
cpMaxSendTimeNV7
cpMaxSendTimeNV8
cpMaxSendTimeNV9
cpMinSendTimeNV5
cpMinSendTimeNV6
cpMinSendTimeNV8
cpMinSendTimeNV9
cpSetpoints
cpSndDeltaNV5
cpSndDeltaNV8
cpSndDeltaNV9
cpBypassTime
cpHighCurrentFanAlarm
cpHighTempAlarm
cpLowCurrentFanAlarm
cpLowTempAlarm
cpMaxRcvTimeNV10
cpMaxRcvTimeNV11
cpMaxRcvTimeNV13
cpMaxRcvTimeNV14
cpMaxSendTimeNV15
cpMaxSendTimeNV16
cpMaxSendTimeNV17
cpMaxSendTimeNV18
cpMaxSendTimeNV19
cpMaxSendTimeNV20
cpMaxSendTimeNV21
cpMinSendTimeNV15
cpMinSendTimeNV17
cpMinSendTimeNV19
cpMinSendTimeNV20
cpMinSendTimeNV21
cpSndDeltaNV15
cpSndDeltaNV17
cpSndDeltaNV19
cpSndDeltaNV20
cpSndDeltaNV21
|
| |
Details: |
| Resource Set:
| Standard 00:00:00:00:00:00:00:00-0 |
| Index:
| 101 |
| Obsolete:
| no |
| Key:
| 8540 |
|
Inheriting:
| no |
|
Principal Variable
| nvoSpaceTemp |
Mandatory Network Variables |
| nviSpaceTemp | Space Temperature Input.: This input network variable is used to connect an external space temperature sensor to the node.
|
| Member Number:
| 1 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviSetpoint | Temperature Setpoint Input (absolute): This input network variable is used to allow the temperature setpoints for the occupied and standby modes to be changed via the network.
|
| Member Number:
| 2 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviApplicMode | Application Mode Input.: This network variable input is used to coordinate the Wall Unit with any supervisory controller.
|
| Member Number:
| 3 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviEmergOverride | Emergency Override Input.: This input network variable is used to command the device into different emergency modes.
|
| Member Number:
| 4 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoSpaceTemp | Effective Space Temperature Output.: This output network variable is used to monitor the effective space temperature that the Wall Unit is using for control.
|
| Member Number:
| 5 | |
Base type:
| | | Direction:
| output | | Service:
| acknowledged |
|
| nvoUnitStatus | Unit Status Output.: This output network variable is available to report the Wall Unit Controller status.
|
| Member Number:
| 6 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
| nvoEffectSetpt | Effective Setpoint Output.:
This output network variable is used to monitor the effective temperature setpoint which may depend on nciSetpoints, nvoEffectOccup, nviSetpoint, nviApplicMode, and any local setpoint adjustment.
|
| Member Number:
| 7 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
| nvoDischargeAirTemp | Discharge Air Temperature Output.:
This output network variable is used to monitor the temperature of the discharge air that leaves the Wall Unit, if the unit controller provides a hardwired temperature sensor for this purpose.
|
| Member Number:
| 8 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
| nvoDischargeAirSetpt | Discharge Air Temperature Setpoint Output.: This output network variable is used to monitor the discharge air temperature setpoint.
|
| Member Number:
| 9 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
Optional Network Variables |
| nviOccSensor | Occupancy Sensor Input.: This input network variable is used to indicate the presence of occupants in the controlled space. It is typically sent by an occupancy sensor.
|
| Member Number:
| 10 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviOccSchedule | Occupancy Scheduler Input.: This input network variable is used to command the Wall Unit Controller into different occupancy modes.
|
| Member Number:
| 11 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviOccManCmd | Occupancy Override Input.: This input network variable is used to command the Wall Unit Controller into different occupancy modes.
|
| Member Number:
| 12 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviOutdoorAirTemp | Outdoor Air Temperature Input.: This input network variable represents information from an outdoor air temperature sensor.
|
| Member Number:
| 13 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviOutdoorAirDamper | Outdoor Air Damper Position Input.: This input network variable is used to provide an outdoor air damper position.
|
| Member Number:
| 14 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoOutdoorAirDamper | Outdoor Air Damper Output Position.: This output network variable reflects the current position of the outdoor supply air damper controlled by the Wall Unit controller.
|
| Member Number:
| 15 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged, repeated |
|
| nvoEffectOccup | Effective Occupancy Output.: This output network variable is used to indicate the actual occupancy mode of the unit.
|
| Member Number:
| 16 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
| nvoOutdoorAirTemp | Outdoor Air Temperature Output.: This output network variable is used to monitor the outdoor air temperature if the unit controller provides a hardwired temperature sensor for this purpose.
|
| Member Number:
| 17 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
| nvoFilterAlarm | Filter Alarm Output.: This output network variable is used to report an filter alarm.
|
| Member Number:
| 18 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged, repeated |
|
| nvoMixAirTemp | Mixed Air Temperature Output.: This output network variable is used to monitor the omixed air temperature if the unit controller provides a hardwired temperature sensor for this purpose.
|
| Member Number:
| 19 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged, repeated |
|
| nvoReturnAirTemp | Return Air Temperature Output.: This output network variable is used to monitor the return air temperature if the unit controller provides a hardwired temperature sensor for this purpose.
|
| Member Number:
| 20 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged, repeated |
|
| nvoFanCurrent | Fan Current Output.: This output network variable is used to report the actual current of the fan.
|
| Member Number:
| 21 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged, repeated |
|
Mandatory Configuration Properties |
| cpMaxSendTimeNV5 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 1 | |
Base type:
| | |
Applies to
| nvoSpaceTemp | | Array:
| not permitted | | Default:
| 90,0 |
|
| cpMaxSendTimeNV6 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 2 | |
Base type:
| | |
Applies to
| nvoUnitStatus | | Array:
| not permitted | | Default:
| 90,0 |
|
| cpMaxSendTimeNV7 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 3 | |
Base type:
| | |
Applies to
| nvoEffectSetpt | | Array:
| not permitted | | Default:
| 90,0 |
|
| cpMaxSendTimeNV8 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
|
| cpMaxSendTimeNV9 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
|
| cpMaxRcvTimeNV1 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 13 | |
Base type:
| | |
Applies to
| nviSpaceTemp | | Array:
| not permitted | | Default:
| 300,0 |
|
| cpMaxRcvTimeNV2 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 14 | |
Base type:
| | |
Applies to
| nviSetpoint | | Array:
| not permitted | | Default:
| 0,0 |
|
| cpMaxRcvTimeNV3 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 15 | |
Base type:
| | |
Applies to
| nviApplicMode | | Array:
| not permitted | | Default:
| 0,0 |
|
| cpMinSendTimeNV5 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 20 | |
Base type:
| | |
Applies to
| nvoSpaceTemp | | Array:
| not permitted | | Default:
| 10,0 |
|
| cpMinSendTimeNV6 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 21 | |
Base type:
| | |
Applies to
| nvoUnitStatus | | Array:
| not permitted | | Default:
| 5,0 |
|
| cpMinSendTimeNV8 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
|
| cpMinSendTimeNV9 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
|
| cpSndDeltaNV5 | Send on delta.: The minimum change required to force transmission of the output value.
|
| Member Number:
| 29 | |
Base type:
| | |
Applies to
| nvoSpaceTemp | | Array:
| not permitted | | Default:
| 00*4 |
|
| cpSndDeltaNV8 | Send on delta.: The minimum change required to force transmission of the output value.
|
|
| cpSndDeltaNV9 | Send on delta.: The minimum change required to force transmission of the output value.
|
|
| cpSetpoints | Occupancy temperature setpoints.: The occupancy temperature setpoints for heat and cool mode.
|
| Member Number:
| 37 | |
Base type:
| | |
Applies to
| SFPTwallUnit | | Array:
| not permitted | | Minimum:
| -10,00,-10,00,-10,00,-10,00,-10,00,-10,00 | | Maximum:
| 35,00,35,00,35,00,35,00,35,00,35,00 | | Default:
| 23,00,25,00,28,00,21,00,19,00,16,00 |
|
Optional Configuration Properties |
| cpMaxSendTimeNV15 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
|
| cpMaxSendTimeNV16 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 7 | |
Base type:
| | |
Applies to
| nvoEffectOccup | | Array:
| not permitted | | Default:
| 90,0 |
|
| cpMaxSendTimeNV17 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 8 | |
Base type:
| | |
Applies to
| nvoOutdoorAirTemp | | Array:
| not permitted | | Default:
| 90,0 |
|
| cpMaxSendTimeNV18 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 9 | |
Base type:
| | |
Applies to
| nvoFilterAlarm | | Array:
| not permitted | | Default:
| 90,0 |
|
| cpMaxSendTimeNV19 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 10 | |
Base type:
| | |
Applies to
| nvoMixAirTemp | | Array:
| not permitted | | Default:
| 90,0 |
|
| cpMaxSendTimeNV20 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 11 | |
Base type:
| | |
Applies to
| nvoReturnAirTemp | | Array:
| not permitted | | Default:
| 90,0 |
|
| cpMaxSendTimeNV21 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 12 | |
Base type:
| | |
Applies to
| nvoFanCurrent | | Array:
| not permitted | | Default:
| 90,0 |
|
| cpMaxRcvTimeNV10 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 16 | |
Base type:
| | |
Applies to
| nviOccSensor | | Array:
| not permitted | | Default:
| 300,0 |
|
| cpMaxRcvTimeNV11 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 17 | |
Base type:
| | |
Applies to
| nviOccSchedule | | Array:
| not permitted | | Default:
| 300,0 |
|
| cpMaxRcvTimeNV13 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 18 | |
Base type:
| | |
Applies to
| nviOutdoorAirTemp | | Array:
| not permitted | | Default:
| 300,0 |
|
| cpMaxRcvTimeNV14 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
|
| cpMinSendTimeNV15 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
|
| cpMinSendTimeNV17 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 25 | |
Base type:
| | |
Applies to
| nvoOutdoorAirTemp | | Array:
| not permitted | | Default:
| 10,0 |
|
| cpMinSendTimeNV19 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 26 | |
Base type:
| | |
Applies to
| nvoMixAirTemp | | Array:
| not permitted | | Default:
| 5,0 |
|
| cpMinSendTimeNV20 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 27 | |
Base type:
| | |
Applies to
| nvoReturnAirTemp | | Array:
| not permitted | | Default:
| 10,0 |
|
| cpMinSendTimeNV21 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 28 | |
Base type:
| | |
Applies to
| nvoFanCurrent | | Array:
| not permitted | | Default:
| 10,0 |
|
| cpSndDeltaNV15 | Send on delta.: The minimum change required to force transmission of the output value.
|
|
| cpSndDeltaNV17 | Send on delta.: The minimum change required to force transmission of the output value.
|
| Member Number:
| 33 | |
Base type:
| | |
Applies to
| nvoOutdoorAirTemp | | Array:
| not permitted | | Default:
| 00*4 |
|
| cpSndDeltaNV19 | Send on delta.: The minimum change required to force transmission of the output value.
|
| Member Number:
| 34 | |
Base type:
| | |
Applies to
| nvoMixAirTemp | | Array:
| not permitted | | Default:
| 00*4 |
|
| cpSndDeltaNV20 | Send on delta.: The minimum change required to force transmission of the output value.
|
| Member Number:
| 35 | |
Base type:
| | |
Applies to
| nvoReturnAirTemp | | Array:
| not permitted | | Default:
| 00*4 |
|
| cpSndDeltaNV21 | Send on delta.: The minimum change required to force transmission of the output value.
|
| Member Number:
| 36 | |
Base type:
| | |
Applies to
| nvoFanCurrent | | Array:
| not permitted | | Default:
| 00*4 |
|
| cpBypassTime | Bypass time.: The maximum amount of time that the controller can be in the bypass (occupancy) mode following the last bypass request. Zero disables the timer.
|
| Member Number:
| 38 | |
Base type:
| | |
Applies to
| SFPTwallUnit | | Array:
| not permitted | | Default:
| 0 |
|
| cpHighTempAlarm | High limit 1.: The alarm high limit against which the value field of the output value is tested for alarm conditions.
|
| Member Number:
| 40 | |
Base type:
| | |
Applies to
| nvoSpaceTemp | | Array:
| not permitted | | Default:
| 00*4 |
|
| cpLowTempAlarm | Low limit 1.: The alarm low limit against which the value field of the output value is tested for alarm conditions.
|
| Member Number:
| 41 | |
Base type:
| | |
Applies to
| nvoSpaceTemp | | Array:
| not permitted | | Default:
| 00*4 |
|
| cpHighCurrentFanAlarm | High limit 1.: The alarm high limit against which the value field of the output value is tested for alarm conditions.
|
| Member Number:
| 43 | |
Base type:
| | |
Applies to
| nvoFanCurrent | | Array:
| not permitted | | Default:
| 00*4 |
|
| cpLowCurrentFanAlarm | Low limit 1.: The alarm low limit against which the value field of the output value is tested for alarm conditions.
|
| Member Number:
| 44 | |
Base type:
| | |
Applies to
| nvoFanCurrent | | Array:
| not permitted | | Default:
| 00*4 |
|
