Closed-Loop Sensor (CLS). A basic object with feedback, used with any form of sensor.
|
| |
Network Variables | Configuration Properties |
nviValueFb
nvoValue
nviPresetFb
nvoPreset
nvoRawHwData
| nciAlarmClearT1
nciAlarmClearT2
nciAlarmSetT1
nciAlarmSetT2
nciDefault
nciGain
nciHighLim1
nciHighLim2
nciInvert
nciLimHystHi1
nciLimHystHi2
nciLimHystLow1
nciLimHystLow2
nciLocation
nciLowLim1
nciLowLim2
nciMaxRng
nciMaxSendT
nciMinDelta
nciMinRng
nciMinSendT
nciOffset
nciOutInhT
nciOverBehave
nciOverValue
nciTransTblX
nciTransTblY
|
| |
Details: |
| Resource Set:
| Standard 00:00:00:00:00:00:00:00-0 |
| Index:
| 3 |
| Obsolete:
| no |
| Key:
| 2 |
|
Inheriting:
| no |
|
Principal Variable
| nvoValue |
Mandatory Network Variables |
| nviValueFb | Value feedback input.: Used to synchronize closed loop sensor objects when connected in multiple relationships.
|
| Member Number:
| 1 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoValue | Value output.: Transmits the value from the sensor after conversion to correct units.
|
| Member Number:
| 2 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
Optional Network Variables |
| nviPresetFb | Preset input feedback.: Receives preset function feedback information used to synchronize multiple source objects.
|
| Member Number:
| 3 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoRawHwData | Raw hardware data output.: Transmits the value obtained from the sensor prior to any transformation.
|
| Member Number:
| 4 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
| nvoPreset | Preset output.: Used to program or control the preset of a destination object.
|
| Member Number:
| 5 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
Optional Configuration Properties |
| nciLocation | Location label.: Provides descriptive physical location information related to the object.
|
|
| nciGain | Gain: Used to calibrate external hardware via a multiplication factor.
|
|
| nciOffset | Offset: Used to calibrate external hardware with additive offset after transformation.
|
|
| nciMaxRng | Maximum range.: The maximum value limit of the output.
|
| Member Number:
| 4 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciMinRng | Minimum range.: The minimum value limit of the output.
|
| Member Number:
| 5 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciMinDelta | Send on delta.: The minimum change required to force transmission of the output value.
|
| Member Number:
| 6 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciMaxSendT | Maximum send time.: The maximum period of time before a retransmission of value.
|
| Member Number:
| 7 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciMinSendT | Minimum send time.: The minimum period of time between retransmissions of value.
|
| Member Number:
| 8 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciInvert | Invert output.: Used to invert active polarity if the hardware sensor is a switch.
|
| Member Number:
| 9 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciTransTblX | Translation table X.: Used in conjunction with Translation table Y to create a linearization table.
|
|
| nciTransTblY | Translation table Y.: Used in conjunction with Translation table X to create a linearization table.
|
|
| nciHighLim1 | High limit 1.: Used to remotely set the alarm high limit 1.
|
| Member Number:
| 12 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciHighLim2 | High limit 2.: Used to remotely set the alarm high limit 2.
|
| Member Number:
| 13 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciLowLim1 | Low limit 1.: Used to remotely set the alarm low limit 1.
|
| Member Number:
| 14 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciLowLim2 | Low limit 2.: Used to remotely set the alarm low limit 2.
|
| Member Number:
| 15 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciAlarmSetT1 | Alarm set time 1.: The time period that an alarm 1 condition must exist before it is regarded as a valid alarm.
|
| Member Number:
| 16 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciAlarmSetT2 | Alarm set time 2.: The time period that an alarm 2 condition must exist before it is regarded as a valid alarm.
|
| Member Number:
| 17 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciAlarmClearT1 | Alarm clear time 1.: The time period that an alarm 1 condition must not exist before it is regarded as a valid cleared alarm.
|
| Member Number:
| 18 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciAlarmClearT2 | Alarm clear time 2.: The time period that an alarm 2 condition must not exist before it is regarded as a valid cleared alarm.
|
| Member Number:
| 19 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciLimHystHi1 | Hysteresis high 1.: The hysteresis level for the value field of the alarm high 1 comparison threshold.
|
| Member Number:
| 20 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciLimHystHi2 | Hysteresis high 2.: The hysteresis level for the value field of the alarm high 2 comparison threshold.
|
| Member Number:
| 21 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciLimHystLow1 | Hysteresis low 1.: The hysteresis level for the value field of the alarm low 1 comparison threshold.
|
| Member Number:
| 22 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciLimHystLow2 | Hysteresis low 2.: The hysteresis level for the value field of the alarm low 2 comparison threshold.
|
| Member Number:
| 23 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciOutInhT | Alarm output inhibit time.: Time period for which alarms are inhibited after enabling, node reset, or node is put on line.
|
| Member Number:
| 24 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciDefault | Default output.: The level the sensor should adopt in certain default conditions.
|
| Member Number:
| 25 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
| nciOverBehave | Override behavior.: The behavior of a sensor when an override request is received.
|
|
| nciOverValue | Override value.: Sets the value a sensor should adopt when an object is overridden and behavior is OV_SPECIFIED.
|
| Member Number:
| 27 | |
Base type:
| | |
Applies to
| nvoValue | | Array:
| not permitted |
|
