This configuration property sets the offset to be applied to a hardware sensor to generate a network variable output. It is typically used to calibrate the external hardware by specifying the level that the network variable should take based on the current data from the hardware at the time of the calibration. This offset applies after the use of any translation table or gain factor. The data type must be the same as that of the network variable.
Neuron C Type:
Inheriting from network variable
SFPTairVelocitySensor SFPTclosedLoopSensor SFPTglobalSolarRadiation SFPTopenLoopSensor SFPTpressureSensor