Air-Velocity Sensor.. Used to measure the speed of a gas, typically for HVAC applications.
|
| |
Network Variables | Configuration Properties |
nvoAirVelocity
nvoAirFlow
nvoAirFlowFloat
| nciMaxSendTime
nciMinSendTime
nciSendOnDelta
nciDuctArea
nciDuctAreaNV01
nciDuctAreaNV02
nciMaxSendTimeNV01
nciMaxSendTimeNV02
nciMaxSendTimeNV03
nciMinSendTimeNV01
nciMinSendTimeNV02
nciMinSendTimeNV03
nciSendOnDeltaNV01
nciSendOnDeltaNV02
nciSendOnDeltaNV03
nciVelocityGain
nciVelocityOffset
|
| |
Details: |
| Resource Set:
| Standard 00:00:00:00:00:00:00:00-0 |
| Index:
| 78 |
| Obsolete:
| no |
| Key:
| 1083 |
|
Inheriting:
| no |
|
Principal Variable
| nvoAirVelocity |
Mandatory Network Variables |
| nvoAirVelocity | Air Velocity.: This output network variable reports the velocity detected by the sensor.
|
| Member Number:
| 1 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
Optional Network Variables |
| nvoAirFlow | Duct Flow Rate.: This output network variable provides the flow volume flowing through the duct.
|
| Member Number:
| 2 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
| nvoAirFlowFloat | Flow Rate.: This output network variable provides the flow volume flowing through the duct.
|
| Member Number:
| 3 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
Mandatory Configuration Properties |
| nciMaxSendTime | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
|
| nciMinSendTime | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
|
| nciSendOnDelta | Send on delta.: The minimum change required to force transmission of the output value.
|
|
Optional Configuration Properties |
| nciVelocityOffset | Generic offset.: Used to calibrate the level that the associated output network variable should adopt after any translation table or gain factor.
|
|
| nciDuctAreaNV01 | Duct area or size.: The duct area used to calculate the air flow, relevant only for VAV actuators / controllers.
|
| Member Number:
| 5 | |
Base type:
| | |
Applies to
| nvoAirVelocity | | Array:
| not permitted | | Default:
| 13,1070 |
|
| nciDuctAreaNV02 | Duct area or size.: The duct area used to calculate the air flow, relevant only for VAV actuators / controllers.
|
| Member Number:
| 6 | |
Base type:
| | |
Applies to
| nvoAirFlow | | Array:
| not permitted | | Default:
| 13,1070 |
|
| nciVelocityGain | Gain: This parameter is used to calibrate the external hardware.
|
|
| nciMaxSendTimeNV01 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 8 | |
Base type:
| | |
Applies to
| nvoAirVelocity | | Array:
| not permitted | | Default:
| 0,0 |
|
| nciMaxSendTimeNV02 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 9 | |
Base type:
| | |
Applies to
| nvoAirFlow | | Array:
| not permitted | | Default:
| 0,0 |
|
| nciMaxSendTimeNV03 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 10 | |
Base type:
| | |
Applies to
| nvoAirFlowFloat | | Array:
| not permitted | | Default:
| 0,0 |
|
| nciMinSendTimeNV01 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 11 | |
Base type:
| | |
Applies to
| nvoAirVelocity | | Array:
| not permitted | | Default:
| 0,0 |
|
| nciMinSendTimeNV02 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 12 | |
Base type:
| | |
Applies to
| nvoAirFlow | | Array:
| not permitted | | Default:
| 0,0 |
|
| nciMinSendTimeNV03 | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 13 | |
Base type:
| | |
Applies to
| nvoAirFlowFloat | | Array:
| not permitted | | Default:
| 0,0 |
|
| nciSendOnDeltaNV01 | Send on delta.: The minimum change required to force transmission of the output value.
|
| Member Number:
| 14 | |
Base type:
| | |
Applies to
| nvoAirVelocity | | Array:
| not permitted | | Default:
| 00*4 |
|
| nciSendOnDeltaNV02 | Send on delta.: The minimum change required to force transmission of the output value.
|
| Member Number:
| 15 | |
Base type:
| | |
Applies to
| nvoAirFlow | | Array:
| not permitted | | Default:
| 00*4 |
|
| nciSendOnDeltaNV03 | Send on delta.: The minimum change required to force transmission of the output value.
|
| Member Number:
| 16 | |
Base type:
| | |
Applies to
| nvoAirFlowFloat | | Array:
| not permitted | | Default:
| 00*4 |
|
| nciDuctArea | Duct area or size.: The duct area used to calculate the air flow, relevant only for VAV actuators / controllers.
|
|
