SFPTslatTracking

Slat tracking..   

A detailed description of the function profile with all inputs and outputs as well as the configuration parameters can be found at the VDI - Verein der Deutschen Ingineure. The Web Link is:

VDI - Room control functions (RA functions)
 

Network Variables

Configuration Properties

nviCalcEnable
nviOutdoorLuxLev
nviSunAzimuth
nviSunElevation
nvoCalcSblndPos

cpNVType
cpParkingPosition

cpActiveShadePosition
cpDelayTimeHyst
cpLuxActivationLimit
cpLuxDeactivationLimit
cpMaxNVLength
cpMaxSendTime
cpPositioningCycleTime
cpSlatType

 

Details:

Resource Set: Standard 00:00:00:00:00:00:00:00-0
Index: 141
Obsolete: no
Key: 16514
Inheriting: no
Principal Variable nviOutdoorLuxLev


Mandatory Network Variables

nviCalcEnableControl enable.:    
Member Number: 1
Base type:
SNVT_switch
Direction: input
Service: any
nviOutdoorLuxLevOutdoor lux level.:    
Member Number: 2
Base type:
SNVT_xxx
Direction: input
Service: any
nviSunAzimuthSun azimuth.:    
Member Number: 3
Base type:
SNVT_angle_deg
Direction: input
Service: any
nviSunElevationSun elevation.:    
Member Number: 4
Base type:
SNVT_angle_deg
Direction: input
Service: any
nvoCalcSblndPosCalculated sunblind position.:    
Member Number: 5
Base type:
SNVT_setting
Direction: output
Service: any


Mandatory Configuration Properties

cpParkingPositiondefault Setting.:    
Member Number: 1
Base type:
SCPTdefaultSetting
Applies to SFPTslatTracking
Array: not permitted
Default: SET_OFF 0,0 0,00
cpNVTypeNetwork variable type.:   Network variable type for network variables that support changeable types. 
Member Number: 2
Base type:
SCPTnvType
Applies to nviOutdoorLuxLev
Array: not permitted
Default: PID 0:0:0:0:0:0:0:0, Scope 0, Index 1, NVT_CAT_INITIAL, 1 bytes, A=0, B=0, C=0


Optional Configuration Properties

cpLuxActivationLimitHysteresis low 1.:   The hysteresis level for the value field of the low limit 1 comparison threshold. 
Member Number: 3
Base type:
SCPThystLow1
Applies to SFPTslatTracking
Array: not permitted
Default: 00*4
cpLuxDeactivationLimitHysteresis high 1.:   The hysteresis level for the value field of the high limit 1 comparison threshold. 
Member Number: 4
Base type:
SCPThystHigh1
Applies to SFPTslatTracking
Array: not permitted
Default: 00*4
cpDelayTimeHystDelay time, default to scene.:   The delay time, default to scene. 
Member Number: 5
Base type:
SCPTdelayTime
Applies to SFPTslatTracking
Array: not permitted
Default: 0,0
cpActiveShadePosition:    
Member Number: 6
Base type:
SCPTpositionSetting
Applies to SFPTslatTracking
Array: not permitted
Default: SET_OFF 0,0 0,00
cpPositioningCycleTimeUpdate rate, time stamp.:   The update rate of the master clock to the associated network variable. 
Member Number: 7
Base type:
SCPTupdateRate
Applies to SFPTslatTracking
Array: not permitted
Default: 60,0
cpSlatType:    
Member Number: 8
Base type:
SCPTslatType
Applies to SFPTslatTracking
Array: not permitted
Default: 0,0 0,0
cpMaxSendTimeMaximum send time.:   The maximum period of time between consecutive transmissions of the current value. 
Member Number: 9
Base type:
SCPTmaxSendTime
Applies to nvoCalcSblndPos
Array: not permitted
Default: 300,0
cpMaxNVLengthMaximum network variable length.:   Maximum length of a type that may be assigned to the network variable. 
Member Number: 10
Base type:
SCPTmaxNVLength
Applies to SFPTslatTracking
Array: not permitted
Default: 0