Switch. Used for all type of switches, with or without specific hardware.
|
|
Network Variables | Configuration Properties |
nvoSwitch
nviSwitchFb nvoSetting
| nciLocation nciMaxOut nciMaxSendTime nciMinSendTime nciStepValue
|
|
Details: |
Resource Set:
| Standard 00:00:00:00:00:00:00:00-0 |
Index:
| 17 |
Obsolete:
| no |
Key:
| 3200 |
Inheriting:
| no |
Principal Variable
| nvoSwitch |
Mandatory Network Variables |
nvoSwitch | Switch output value.:
|
Member Number:
| 1 |
Base type:
| | Direction:
| output | Service:
| any |
|
Optional Network Variables |
nviSwitchFb | Switch feedback value.:
|
Member Number:
| 2 |
Base type:
| | Direction:
| input | Service:
| any |
|
nvoSetting | Setting output value.:
|
Member Number:
| 3 |
Base type:
| | Direction:
| output | Service:
| any |
|
Optional Configuration Properties |
nciLocation | Location label.: Provides descriptive physical location information related to the object.
|
Member Number:
| 1 |
Base type:
| |
Applies to
| SFPTswitch | Array:
| not permitted |
|
nciMinSendTime | Minimum send time.: Minimum period between output NV transmissions (maximum transmission rate)
|
Member Number:
| 2 |
Base type:
| |
Applies to
| SFPTswitch | Array:
| not permitted | Minimum:
| 0,1 | Maximum:
| 2,0 | Default:
| 0,1 |
|
nciMaxSendTime | Send heartbeat.: Maximum period of time that expires before the object automatically transmits the present value of the lux level output NV.
|
Member Number:
| 3 |
Base type:
| |
Applies to
| SFPTswitch | Array:
| not permitted |
|
nciStepValue | Ramp step value.: When up/down pushbuttons are used, this parameter can be used to adjust the total ramp time from 0 to 100%.
|
Member Number:
| 4 |
Base type:
| |
Applies to
| SFPTswitch | Array:
| not permitted |
|
nciMaxOut | Maximum output value.: Used to limit the maximum value of the Switch output.
|
Member Number:
| 5 |
Base type:
| |
Applies to
| SFPTswitch | Array:
| not permitted | Minimum:
| 0,0 | Maximum:
| 100,0 | Default:
| 100,0 |
|