Utility Data-Logger Register.. Used to report energy use from an energy meter.
|
| |
Network Variables | Configuration Properties |
nvoRegVal
nviEndPeriod
nviHistChoice
nviHistTime
nviRegState
nviRegVal
nvoHistTime
nvoHistVal
nvoMeasPeriod
| nciBaseValue
nciHLimit
nciRegName
nciSendOnDelta
|
| |
Details: |
| Resource Set:
| Standard 00:00:00:00:00:00:00:00-0 |
| Index:
| 71 |
| Obsolete:
| no |
| Key:
| 2110 |
|
Inheriting:
| no |
|
Principal Variable
| nvoRegVal |
Mandatory Network Variables |
| nvoRegVal | Register value output.: This network variable contains the current value of the register with a time stamp and status bits all contained within one variab.
|
| Member Number:
| 1 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
Optional Network Variables |
| nviHistChoice | Register historical period selection input.: This input network variable controls which history value is shown on the output network variable side via the network variables voHistVal and nvoHistTime.
|
| Member Number:
| 2 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviHistTime | Register historical time selection input.:
This input network variable controls, according to the time, which history value is shown on the output network variable side via the network variables nvoHistVal and nvoHistTime.
|
| Member Number:
| 3 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviRegVal | Register value input.: A value can be sent to the register object via the network using this network variable.
|
| Member Number:
| 4 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviRegState | Register state selection input.:
The register can be activated or deactivated by using this variable. When a register is activated the register object measures into the register. If the register is deactivated it does not measure but it is read/write-able.
|
| Member Number:
| 5 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviEndPeriod | Measuring period ending input.:
This input network variable controls the ending of a billing period. When the billing period is terminated, the current register value will be transferred to the next history register. The series register cannot use this roperty.
|
| Member Number:
| 6 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoHistVal | Register historical value output.:
This output network variable contains the register object's historical value of a chosen time or history period. The output value is selected using the nviHistChoice or nviHistTime variables.
|
| Member Number:
| 7 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
| nvoHistTime | Register historical time output.: This output network variable contains a billing period end time. The output value is selected using the nviHistChoice and nviHistTime variables.
|
| Member Number:
| 8 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
| nvoMeasPeriod | Register measuring period output.:
This output network variable contains the length of the measuring period. If used, the register object measures series or maximum value data. Otherwise the value is zero.
|
| Member Number:
| 9 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
Optional Configuration Properties |
| nciRegName | Register name.: The name of a utility data logger register device.
|
|
| nciHLimit | High limit 1.: The alarm high limit against which the value field of the output value is tested for alarm conditions.
|
|
| nciSendOnDelta | Send on delta.: The minimum change required to force transmission of the output value.
|
|
| nciBaseValue | Base value.: The base value (where to begin counting)
|
|
