Entry / Exit Object.. An Entry / Exit device is a door, lock, sluice, or something that allows and prohibits entry of a physical unit in to and out of an area.
|
| |
Network Variables | Configuration Properties |
nviEntryState
nvoEntryStatus
nviDirection
nviEntryOpMode
nviOpen
nviPositioned
nviSluiceLock
nviUpdateServ
nvoAftAlarm
nvoDirectionFb
nvoOpenFb
nvoPreAlarm
nvoServiceMsg
nvoSluiceLock
| nciMaxRcvTime
nciMaxSendTime
nciMinSendTime
nciAftAlarmDly
nciDefaultOpMode
nciDefaultState
nciEmergencyCnfg
nciLocation
nciNetworkConfig
nciObjMajVer
nciObjMinVer
nciOpenTime
nciPreAlarmDly
nciSafExtCnfg
nciSluiceCnfg
|
| |
Details: |
| Resource Set:
| Standard 00:00:00:00:00:00:00:00-0 |
| Index:
| 40 |
| Obsolete:
| no |
| Key:
| 5051 |
|
Inheriting:
| no |
Mandatory Network Variables |
| nviEntryState | Entry state.: Desired state for an entry object, e.g., a door, lock, sluice, or something that controls entry of an area.
|
| Member Number:
| 1 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoEntryStatus | Entry status.: Status information from an entry object, e.g., a door, lock, sluice, or something that allows/prohits entry of an area.
|
| Member Number:
| 2 | |
Base type:
| | | Direction:
| output | | Service:
| acknowledged |
|
Optional Network Variables |
| nviEntryOpMode | Entry operation mode.: Operation-mode for an entry object, e.g., a door, lock, sluice, or something which allows/prohibits entry to an area.
|
| Member Number:
| 3 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoPreAlarm | Warning alarm.:
Warning alarm setting when the device has been unable to perform a requested command longer than the nciPreAlarmDly time, but not as long as the nciAftAlarmDly time.
|
| Member Number:
| 4 | |
Base type:
| | | Direction:
| output | | Service:
| acknowledged |
|
| nviPositioned | In lockable position.: Whether the mechanical equipment being subject to locking is in lockable position or not. Typically, this can be an open or closed door.
|
| Member Number:
| 5 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoAftAlarm | After-warning alarm.: Alarm setting when the device has been unable to perform a requested command for more than the nciPreAlarmDly time.
|
| Member Number:
| 6 | |
Base type:
| | | Direction:
| output | | Service:
| acknowledged |
|
| nviOpen | Device-open request.: opens the device in any state but EM_BLOCKED or EM_MANUAL. After the open command is taken away, the device goes back to its previous state.
|
| Member Number:
| 7 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoOpenFb | Device-open command feedback.: Feedback of the nviOpen network variable input.
|
| Member Number:
| 8 | |
Base type:
| | | Direction:
| output | | Service:
| acknowledged |
|
| nviDirection | Direction-flow control.: Control the direction of persons/items/fluids through device.
|
| Member Number:
| 9 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoDirectionFb | Direction-flow control feedback.: Direction of persons/items/fluids through device.
|
| Member Number:
| 10 | |
Base type:
| | | Direction:
| output | | Service:
| acknowledged |
|
| nviUpdateServ | Service-message update request.: Request an update of an optional service-message output.
|
| Member Number:
| 11 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoServiceMsg | Service message.: Current service-message information.
|
| Member Number:
| 12 | |
Base type:
| | | Direction:
| output | | Service:
| acknowledged |
|
| nviSluiceLock | Sluice token input.: The sluice token input must be set to TOKEN to indicate that an opening cycle is legal in case of sluice operation.
|
| Member Number:
| 13 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nvoSluiceLock | Sluice token feedback.: Token feedback output in a sluice-lock configuration.
|
| Member Number:
| 14 | |
Base type:
| | | Direction:
| output | | Service:
| any |
|
Mandatory Configuration Properties |
| nciMaxRcvTime | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 1 | |
Base type:
| | |
Applies to
| SFPTentryExit | | Array:
| not permitted | | Maximum:
| 3600,0 |
|
| nciMaxSendTime | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 2 | |
Base type:
| | |
Applies to
| nvoEntryStatus | | Array:
| not permitted | | Maximum:
| 3600,0 |
|
| nciMinSendTime | Minimum send time.: The minimum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 3 | |
Base type:
| | |
Applies to
| nvoEntryStatus | | Array:
| not permitted | | Maximum:
| 3600,0 |
|
Optional Configuration Properties |
| nciOpenTime | Hold time.: Used to control the time the device is in open state before it returns to its former state (closed, closed/locked, etc.)
|
| Member Number:
| 4 | |
Base type:
| | |
Applies to
| SFPTentryExit | | Array:
| not permitted | | Minimum:
| 1,0 | | Maximum:
| 6553,5 | | Default:
| 6553,5 |
|
| nciDefaultState | Default output.: The position or level the actuator should adopt when updates are not received, or at power-on reset, or when overridden.
|
| Member Number:
| 5 | |
Base type:
| | |
Applies to
| nviEntryState | | Array:
| not permitted |
|
| nciDefaultOpMode | Default output.: The position or level the actuator should adopt when updates are not received, or at power-on reset, or when overridden.
|
| Member Number:
| 6 | |
Base type:
| | |
Applies to
| nviEntryOpMode | | Array:
| not permitted |
|
| nciPreAlarmDly | Delay time, default to scene.: Delay time before a pre-alarm (warning) is sent.
|
| Member Number:
| 7 | |
Base type:
| | |
Applies to
| nvoPreAlarm | | Array:
| not permitted | | Maximum:
| 3600,0 |
|
| nciAftAlarmDly | Delay time, default to scene.: Delay time before an alarm is sent.
|
| Member Number:
| 8 | |
Base type:
| | |
Applies to
| nvoAftAlarm | | Array:
| not permitted | | Maximum:
| 3600,0 |
|
| nciSafExtCnfg | Safety Mode.: Mode that device must be brought to for safety external state of operation.
|
| Member Number:
| 9 | |
Base type:
| | |
Applies to
| nviEntryOpMode | | Array:
| not permitted | | Default:
| 00*3-02 |
|
| nciEmergencyCnfg | Emergency Mode.: Mode that device must be brought to for emergency state of operation.
|
| Member Number:
| 10 | |
Base type:
| | |
Applies to
| nviEntryOpMode | | Array:
| not permitted | | Default:
| 00*3-02 |
|
| nciLocation | Location: Provides descriptive physical location information related to the object.
|
| Member Number:
| 11 | |
Base type:
| | |
Applies to
| SFPTentryExit | | Array:
| not permitted |
|
| nciObjMajVer | Object major version number.: The major version number for the object.
|
| Member Number:
| 12 | |
Base type:
| | |
Applies to
| SFPTentryExit | | Flags:
| constant | | Array:
| not permitted | | Default:
| 1 |
|
| nciObjMinVer | Object minor version number.: The minor version number for the object.
|
| Member Number:
| 13 | |
Base type:
| | |
Applies to
| SFPTentryExit | | Flags:
| device specific, constant | | Array:
| not permitted | | Default:
| 0 |
|
| nciNetworkConfig | Network configuration source.: The value of this field determines the source of the node's network configuration.
|
| Member Number:
| 14 | |
Base type:
| | |
Applies to
| SFPTentryExit | | Flags:
| reset after modification | | Array:
| not permitted | | Default:
| CFG_LOCAL |
|
| nciSluiceCnfg | Master-slave control for sluice. A sluice is built with two or more entry/exit devices with interlock capability.: Role of a device in a sluice operation.
|
| Member Number:
| 15 | |
Base type:
| | |
Applies to
| SFPTentryExit | | Array:
| not permitted | | Default:
| MSC_NUL |
|
