Sunblind Controller.. Controls one or more Sunblind Actuators to open/close sunblinds or similar devices.
|
| |
Network Variables | Configuration Properties |
nvoSblndSetting
nviAutoMode
nviDawn
nviDusk
nviFrost
nviGlare
nviGlobalControl
nviGroupControl
nviIllumLev
nviIndoorRH
nviIndoorTemp
nviLocalControl
nviMaintenance
nviOccManCmd
nviOccSensor
nviOutdoorRH
nviOutdoorTemp
nviOverride
nviRain
nviScene
nviSetMaint
nviSetOverride
nviSunAzimuth
nviSunElevation
nviSunLux
nviTerminalLoad
nviWindowContact
nviWindspeed
nvoSblndState
| nciMaxSendTimeNV01
nciBypassTime
nciLocation
nciMaxReceiveTimeNV05
nciMaxReceiveTimeNV07
nciMaxReceiveTimeNV08
nciMaxReceiveTimeNV18
nciMaxSendTimeNV02
nciNvPriority
nciObjMajVer
nciObjMinVer
nciWeaSenFailPos
nciWinConFailPos
|
| |
Details: |
| Resource Set:
| Standard 00:00:00:00:00:00:00:00-0 |
| Index:
| 83 |
| Obsolete:
| no |
| Key:
| 6111 |
|
Inheriting:
| no |
Mandatory Network Variables |
| nvoSblndSetting | Controller setpoint output.: This output network variable provides the Sunblind Controller setpoint value which may depend on any network input and configuration properties.
|
| Member Number:
| 1 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
Optional Network Variables |
| nvoSblndState | Sunblind controller state output.: This output network variable is used to report the actual setpoint, error messages and the cause of the latest change of this setpoint.
|
| Member Number:
| 2 | |
Base type:
| | | Direction:
| output | | Service:
| unacknowledged |
|
| nviLocalControl | Local setpoint adjustment.: This network variable input is provided to set the controller setpoint output. Usually this command is given by a local control device.
|
| Member Number:
| 3 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviGroupControl | Input for setpoint adjustment in groups.:
This network variable input is provided to set the controller setpoint output. Usually this command is given by a device which is intended to control groups of controllers or actuators.
|
| Member Number:
| 4 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviWindspeed | Wind speed sensor input.: This input network variable is used to get wind speed influence on the controller.
|
| Member Number:
| 5 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviSunLux | Outdoor brightness input standard range.: This input network variable is used to get sun (outdoor) brightness influence with a range from 0...65klux on the controller.
|
| Member Number:
| 6 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviRain | Rain sensor input.: This input network variable is used to get rain sensor influence on the controller.
|
| Member Number:
| 7 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviFrost | Frost sensor input.: This input network variable is used to get frost sensor influence on the controller.
|
| Member Number:
| 8 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviDawn | Dawn state input.: The term "Dawn" means the time before sunrise when it is more bright than during the night but not as bright as the average of daytime.
|
| Member Number:
| 9 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviDusk | Dusk state input.: The term "Dusk" means the time before sunset when it is no longer as bright as the average of daytime but brighter than during the night.
|
| Member Number:
| 10 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviOutdoorTemp | Outdoor air temperature input.: This input network variable is used to get outdoor temperature sensor influence on the controller.
|
| Member Number:
| 11 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviIndoorTemp | Indoor temperature input.: This input network variable is used to get indoor temperature sensor influence on the controller.
|
| Member Number:
| 12 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviOutdoorRH | Outdoor relative humidity input.: This input network variable is used to get outdoor relative humidity sensor influence on the controller.
|
| Member Number:
| 13 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviIndoorRH | Indoor relative humidity input.: This input network variable is used to get indoor relative humidity sensor influence on the controller.
|
| Member Number:
| 14 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviIllumLev | Indoor illumination level input.: This input network variable is used to get indoor light sensor influence on the controller.
|
| Member Number:
| 15 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviScene | Scene trigger input.: Every scene relates to a particular setpoint value, which could be sent via nvoSblndSetting.
|
| Member Number:
| 16 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviGlobalControl | Global setpoint adjustment.: This network variable input is provided to set the controller setpoint output.
|
| Member Number:
| 17 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviWindowContact | Window contact input.: This input network variable is used to get window contact influence on the controller.
|
| Member Number:
| 18 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviAutoMode | Mode enabling/disabling input.: This input network variable is used to get mode switch functionality on the controller.
|
| Member Number:
| 19 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviOverride | Override state input.: This input network variable is used to get override influence on the controller.
|
| Member Number:
| 20 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviMaintenance | Setpoint input for maintenance reasons.: This input network variable is used to get maintenance signal influence on the controller.
|
| Member Number:
| 21 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviTerminalLoad | Heating/cooling demand input.: This input is used to receive the current heating/cooling demand of the system which the sunblind controller shares in.
|
| Member Number:
| 22 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviOccSensor | Occupancy sensor value input.: This input network variable is used to get occupancy sensor influence on the controller.
|
| Member Number:
| 23 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviOccManCmd | Occupancy override input.: This input network variable is used to get business hour info influence on the controller.
|
| Member Number:
| 24 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviGlare | Glare detecting sensor value input.: This input network variable is used to get glare detecting sensor influence on the controller.
|
| Member Number:
| 25 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviSunElevation | Astronomical sensor value input for sun declination.: This network input represents information from a sun-position calculating device.
|
| Member Number:
| 26 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviSunAzimuth | Astronomical sensor value input for sun inclination.: This network input represents information from a sun-position calculating device.
|
| Member Number:
| 27 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviSetOverride | Setpoint override input.: This input network variable is used to get override influence on the controller.
|
| Member Number:
| 28 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
| nviSetMaint | Setpoint input for maintenance reasons.: This input network variable is used to get maintenance influence on the controller.
|
| Member Number:
| 29 | |
Base type:
| | | Direction:
| input | | Service:
| any |
|
Mandatory Configuration Properties |
| nciMaxSendTimeNV01 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 1 | |
Base type:
| | |
Applies to
| nvoSblndSetting | | Array:
| not permitted | | Default:
| 0,0 |
|
Optional Configuration Properties |
| nciMaxSendTimeNV02 | Maximum send time.: The maximum period of time between consecutive transmissions of the current value.
|
| Member Number:
| 3 | |
Base type:
| | |
Applies to
| nvoSblndState | | Array:
| not permitted | | Default:
| 0,0 |
|
| nciMaxReceiveTimeNV05 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 4 | |
Base type:
| | |
Applies to
| nviWindspeed | | Array:
| not permitted | | Default:
| 0,0 |
|
| nciMaxReceiveTimeNV07 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 5 | |
Base type:
| | |
Applies to
| nviRain | | Array:
| not permitted | | Maximum:
| 0,0 | | Default:
| 0,0 |
|
| nciMaxReceiveTimeNV08 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 6 | |
Base type:
| | |
Applies to
| nviFrost | | Array:
| not permitted | | Maximum:
| 0,0 | | Default:
| 0,0 |
|
| nciMaxReceiveTimeNV18 | Maximum receive time.:
The maximum period of time that may expire with no updates on the associated input network variables before the object goes into heartbeat failure mode. A zero value disables the mechanism.
|
| Member Number:
| 7 | |
Base type:
| | |
Applies to
| nviWindowContact | | Array:
| not permitted | | Default:
| 0,0 |
|
| nciNvPriority | Environmental-Input Priority.: Defines the priority of inputs that control the positioning of the sunblinds.
|
|
| nciBypassTime | Bypass time.: The maximum amount of time that the controller can be in the bypass (occupancy) mode following the last bypass request. Zero disables the timer.
|
|
| nciWeaSenFailPos | Weather-Sensor Failure-Position Default.: Defines the default position of the sunblind in the event that the sensor input fails.
|
|
| nciWinConFailPos | Window-Contact -Sensor Failure-Position Default.: Defines the default position of the sunblind in the event that the sensor input fails.
|
| Member Number:
| 11 | |
Base type:
| | |
Applies to
| nviWindowContact | | Array:
| not permitted | | Default:
| SET_OFF 0,0 0,00 |
|
| nciLocation | Location: Provides descriptive physical location information related to the object.
|
|
| nciObjMajVer | Object major version number.: The major version number for the object.
|
|
| nciObjMinVer | Object minor version number.: The minor version number for the object.
|
| Member Number:
| 14 | |
Base type:
| | |
Applies to
| SFPTsunblindController | | Flags:
| device specific, constant | | Array:
| not permitted | | Default:
| 0 |
|
